Added support for BM-Lite UART interface.

Implemented UART interface support in stm32Wb55 HAL

.vscode/c_cpp_properties.json

@@ -0,0 +1,18 @@
+{
+    "configurations": [
+        {
+            "name": "Linux",
+            "defines": ["BMLITE_ON_UART", "NRF52840_XXAA", "BOARD_PCA10056", "BMLITE_USE_CALLBACK"],
+            "cStandard": "c11",
+            "cppStandard": "c++17",
+            "intelliSenseMode": "${default}",
+            "compilerPath": "/usr/bin/arm-none-eabi-gcc",
+            "compilerArgs": [
+                "-mcpu=cortex-m4",
+                "-mthumb",
+                "-mfloat-abi=hard"
+            ]
+       }
+    ],
+    "version": 4
+}

.vscode/launch.json

@@ -14,17 +14,17 @@
             "device": "STM32WB55xx",
             "interface": "swd",
             "runToMain": true,
-        }
+        },
-        {
+        // {
-            "name": "Cortex Debug nRF52840",
+        //     "name": "Cortex Debug nRF52840",
-            "cwd": "${workspaceRoot}",
+        //     "cwd": "${workspaceRoot}",
-            "executable": "${workspaceRoot}/BMLite_examples/out/embedded_app/nRF52840/embedded_app",
+        //     "executable": "${workspaceRoot}/BMLite_examples/out/embedded_app/nRF52840/embedded_app",
-            "request": "launch",
+        //     "request": "launch",
-            "type": "cortex-debug",
+        //     "type": "cortex-debug",
-            "servertype": "jlink",
+        //     "servertype": "jlink",
-            "device": "nRF52840_xxAA",
+        //     "device": "nRF52840_xxAA",
-            "interface": "swd",
+        //     "interface": "swd",
-            "runToMain": true,
+        //     "runToMain": true,
-        }
+        // }
     ]
 }

.vscode/tasks.json

@@ -7,7 +7,7 @@
             "type": "shell",
             "label": "wb55 make",
             "command": "make",
-            "args": ["-j4", "-C", "BMLite_examples", "PLATFORM=stm32wb55", "APP=embedded_app", "DEBUG=y"],
+            "args": ["-j4", "-C", "BMLite_examples", "PLATFORM=stm32wb55", "PORT=UART", "APP=embedded_app", "DEBUG=y"],
             "options": {
                 "cwd": "${workspaceFolder}"
             },

Arduino_lib/BMLite/src/bmlite_hal.h

@@ -73,7 +73,25 @@ void hal_bmlite_reset(bool state);
  * @param[in] Leave CS asserted
  * @return ::fpc_bep_result_t
  */
-fpc_bep_result_t hal_bmlite_spi_write_read(uint8_t *buff, size_t size);
+fpc_bep_result_t hal_bmlite_spi_write_read(uint8_t *write, uint8_t *read, size_t size,
+        bool leave_cs_asserted);
+
+/*
+ * @brief UART write
+ * @param[in] Write buffer
+ * @param[in] Size
+ * @return ::size_t Number of bytes actually written
+ */
+size_t hal_bmlite_uart_write(const uint8_t *data, size_t size);
+
+/*
+ * @brief UART read
+ * @param[in] Read buffer
+ * @param[in] Size
+ * @return ::size_t Number of butes actually read
+ */
+size_t hal_bmlite_uart_read(uint8_t *buff, size_t size);
+
 
 /*
  * @brief Check if BM-Lite IRQ pin is set

BMLite_examples/Makefile

@@ -72,6 +72,13 @@ CFLAGS +=\
        -MMD \
        -MP 
 
+ifeq ($(PORT),UART)
+CFLAGS += -DBMLITE_ON_UART
+else
+CFLAGS += -DBMLITE_ON_SPI
+endif
+
+
 ifeq ($(DEBUG),y)
 CFLAGS +=\
   -g3\

BMLite_examples/embedded_app/src/main.c

@@ -36,8 +36,13 @@ static uint8_t hcp_txrx_buffer[MTU];
 static uint8_t hcp_data_buffer[DATA_BUFFER_SIZE];
 
 static HCP_comm_t hcp_chain = {
+#ifdef BMLITE_ON_UART
+    .read = platform_bmlite_uart_receive,
+    .write = platform_bmlite_uart_send,
+#else
     .read = platform_bmlite_spi_receive,
     .write = platform_bmlite_spi_send,
+#endif
     .pkt_buffer = hcp_data_buffer,
     .txrx_buffer = hcp_txrx_buffer,
     .pkt_size = 0,

BMLite_sdk/inc/bmlite_hal.h

@@ -76,6 +76,22 @@ void hal_bmlite_reset(bool state);
 fpc_bep_result_t hal_bmlite_spi_write_read(uint8_t *write, uint8_t *read, size_t size,
         bool leave_cs_asserted);
 
+/*
+ * @brief UART write
+ * @param[in] Write buffer
+ * @param[in] Size
+ * @return ::size_t Number of bytes actually written
+ */
+size_t hal_bmlite_uart_write(const uint8_t *data, size_t size);
+
+/*
+ * @brief UART read
+ * @param[in] Read buffer
+ * @param[in] Size
+ * @return ::size_t Number of butes actually read
+ */
+size_t hal_bmlite_uart_read(uint8_t *buff, size_t size);
+
 /*
  * @brief Check if BM-Lite IRQ pin is set
  * @return ::bool

BMLite_sdk/inc/platform.h

@@ -65,8 +65,7 @@ fpc_bep_result_t platform_bmlite_spi_send(uint16_t size, const uint8_t *data, ui
  *
  * @return ::fpc_com_result_t
  */
-fpc_bep_result_t platform_bmlite_uart_send(uint16_t size, const uint8_t *data, uint32_t timeout,
+fpc_bep_result_t platform_bmlite_uart_send(uint16_t size, const uint8_t *data, uint32_t timeout);
-        void *session);
 
 /**
  * @brief Receives data from SPI port in blocking mode.
@@ -88,8 +87,7 @@ fpc_bep_result_t platform_bmlite_spi_receive(uint16_t size, uint8_t *data, uint3
  *
  * @return ::fpc_com_result_t
  */
-fpc_bep_result_t platform_bmlite_uart_receive(uint16_t size, uint8_t *data, uint32_t timeout,
+fpc_bep_result_t platform_bmlite_uart_receive(uint16_t size, uint8_t *data, uint32_t timeout);
-        void *session);
 
 /**
  * @brief Stops execution if a debug interface is attached.

BMLite_sdk/src/platform.c

@@ -36,9 +36,9 @@
 fpc_bep_result_t platform_init(void *params)
 {
     fpc_bep_result_t result;
+    hal_timebase_init();
     result = hal_board_init(params);
     if(result == FPC_BEP_RESULT_OK) {
-        hal_timebase_init();
         platform_bmlite_reset();
     }
     return result;
@@ -52,6 +52,56 @@ void platform_bmlite_reset(void)
     hal_timebase_busy_wait(100);
 }
 
+#ifdef BMLITE_ON_UART
+
+fpc_bep_result_t platform_bmlite_uart_send(uint16_t size, const uint8_t *data, uint32_t timeout)
+{
+    #ifdef DEBUG_COMM
+    LOG_DEBUG("-> ");
+    for (int i=0; i<size; i++)
+       LOG_DEBUG("%02X ", data[i]);
+    LOG_DEBUG("\n");
+#endif
+
+    size_t bytes_sent = hal_bmlite_uart_write(data, size);
+    if(bytes_sent == size)
+        return FPC_BEP_RESULT_OK;
+
+    return FPC_BEP_RESULT_IO_ERROR;
+}
+
+fpc_bep_result_t platform_bmlite_uart_receive(uint16_t size, uint8_t *data, uint32_t timeout)
+{
+    size_t total = 0;
+
+    volatile uint32_t start_time = hal_timebase_get_tick();
+	volatile uint32_t curr_time = start_time;
+    while (total < size &&
+    		(!timeout || (curr_time = hal_timebase_get_tick()) - start_time < timeout)) {
+                total += hal_bmlite_uart_read(data + total, size);
+                if(hal_check_button_pressed()) {
+                    break;
+                }
+    }
+    if(total < size) {
+        return FPC_BEP_RESULT_TIMEOUT;
+    }
+
+
+#ifdef DEBUG_COMM
+    LOG_DEBUG("<- ");
+    if(res == FPC_BEP_RESULT_OK) {
+        for (int i=0; i<size; i++)
+        LOG_DEBUG("%02X ", data[i]);
+    }
+    LOG_DEBUG("\n");
+#endif
+
+    return FPC_BEP_RESULT_OK;
+}
+
+#else    //  BMLITE_ON_SPI
+
 fpc_bep_result_t platform_bmlite_spi_send(uint16_t size, const uint8_t *data, uint32_t timeout)
 {
     uint8_t buff[size];
@@ -93,6 +143,8 @@ fpc_bep_result_t platform_bmlite_spi_receive(uint16_t size, uint8_t *data, uint3
     return res;
 }
 
+#endif
+
 __attribute__((weak)) uint32_t hal_check_button_pressed()
 {
     return 0;

HAL_Driver/RaspberryPi/src/platform_rpi.c

@@ -86,8 +86,8 @@ fpc_bep_result_t hal_board_init(void *params)
     }
 
     if (p->iface == COM_INTERFACE) {
-        p->hcp_comm->read = rpi_com_receive;
+        p->hcp_comm->read = platform_bmlite_uart_receive;
-        p->hcp_comm->write = rpi_com_send;
+        p->hcp_comm->write = platform_bmlite_uart_send;
     } else {
         p->hcp_comm->read = platform_bmlite_spi_receive;
         p->hcp_comm->write = platform_bmlite_spi_send;

HAL_Driver/RaspberryPi/src/rpi_com.c

@@ -84,26 +84,20 @@ bool rpi_com_init(char *port, int baudrate, int timeout)
     return true;
 }
 
-fpc_bep_result_t rpi_com_send(uint16_t size, const uint8_t *data, uint32_t timeout)
+size_t hal_bmlite_uart_write(const uint8_t *data, size_t size)
 {
-    fpc_bep_result_t res = FPC_BEP_RESULT_OK;
     int n;
 
     if (fd < 0) {
         fprintf(stderr, "error invalid file descriptor");
-        return FPC_BEP_RESULT_INVALID_ARGUMENT;
+        return 0;
     }
 
-    n = write(fd, data, size);
+    return write(fd, data, size);
 
-    if (n != size) {
-        res = FPC_BEP_RESULT_IO_ERROR;
 }
 
-    return res;
+size_t hal_bmlite_uart_read(uint8_t *data, size_t size)
-}
-
-fpc_bep_result_t rpi_com_receive(uint16_t size, uint8_t *data, uint32_t timeout)
 {
     fpc_bep_result_t res = FPC_BEP_RESULT_OK;
     int n_read = 0;
@@ -136,7 +130,7 @@ fpc_bep_result_t rpi_com_receive(uint16_t size, uint8_t *data, uint32_t timeout)
         }
     }
 
-    return res;
+    return n_read;
 }
 
 

HAL_Driver/nRF52840/src/hal_leds.c

@@ -19,7 +19,7 @@
 
 
 /**
- * @file   board_leds.c
+ * @file   hal_leds.c
  * @brief  Leds control functions.
  */
 

HAL_Driver/nRF52840/src/hal_spi.c

@@ -18,10 +18,12 @@
  */
 
 /**
- * @file    platform_spi.c
+ * @file    hal_spi.c
- * @brief   SPI functions
+ * @brief   SPI HAL functions
  */
 
+#ifdef BMLITE_ON_SPI
+
 #include "nrf_drv_spi.h"
 #include "boards.h"
 #include "nrf_gpio.h"
@@ -110,3 +112,4 @@ void nordic_bmlite_spi_init(uint32_t speed_hz)
     nrf_drv_gpiote_out_init(BMLITE_CS_PIN, &out_config);
 }
 
+#endif

HAL_Driver/nRF52840/src/hal_timebase.c

@@ -18,7 +18,7 @@
  */
 
 /**
- * @file    platform_timebase.c
+ * @file    hal_timebase.c
  * @brief   timebase interface functions
  */
 

HAL_Driver/nRF52840/src/hal_uart.c

@@ -0,0 +1,29 @@
+/*
+ * Copyright (c) 2020 Fingerprint Cards AB
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *   https://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ *
+ * Modified by Andrey Perminov <andrey.ppp@gmail.com> 
+ * for FPC BM-Lite applications
+ */
+
+/**
+ * @file    hal_uart.c
+ * @brief   UART HAL functions
+ */
+
+#ifdef BMLITE_ON_UART
+
+#error "UART HAL for nRF52840 is not implemented yet"
+
+#endif

HAL_Driver/stm32wb55/inc/hal_config.h

@@ -68,6 +68,32 @@
 #define BMLITE_SPI_DMA_IRQn_TX         DMA1_Channel3_IRQn
 #define BMLITE_SPI_DMA_IRQ_HANDLER_TX  DMA1_Channel3_IRQHandler
 
+/**
+ * Configuration of UART used for BM-Lite communication.
+*/
+#define FPC_BMLITE_USART                     USART1
+#define FPC_BMLITE_USART_AF                  GPIO_AF7_USART1
+#define FPC_BMLITE_USART_CLK_ENABLE          __HAL_RCC_USART1_CLK_ENABLE
+#define FPC_BMLITE_USART_IRQn                USART1_IRQn
+#define FPC_BMLITE_USART_IRQ_HANDLER         USART1_IRQHandler
+
+#define FPC_BMLITE_USART_RX_PORT             GPIOA
+#define FPC_BMLITE_USART_RX_PIN              GPIO_PIN_10
+#define FPC_BMLITE_USART_TX_PORT             GPIOA
+#define FPC_BMLITE_USART_TX_PIN              GPIO_PIN_9
+#define FPC_BMLITE_USART_RX_PORT_CLK_ENABLE  __HAL_RCC_GPIOA_CLK_ENABLE
+#define FPC_BMLITE_USART_TX_PORT_CLK_ENABLE  __HAL_RCC_GPIOB_CLK_ENABLE
+
+#define FPC_BMLITE_USART_DMA_CHANNEL_RX      DMA1_Channel6
+#define FPC_BMLITE_USART_DMA_REQ_RX          DMA_REQUEST_USART1_RX
+#define FPC_BMLITE_USART_DMA_IRQn_RX         DMA1_Channel6_IRQn
+#define FPC_BMLITE_USART_DMA_IRQ_HANDLER_RX  DMA1_Channel6_IRQHandler
+#define FPC_BMLITE_USART_DMA_CHANNEL_TX      DMA1_Channel7
+#define FPC_BMLITE_USART_DMA_REQ_TX          DMA_REQUEST_USART1_TX
+#define FPC_BMLITE_USART_DMA_IRQn_TX         DMA1_Channel7_IRQn
+#define FPC_BMLITE_USART_DMA_IRQ_HANDLER_TX  DMA1_Channel7_IRQHandler
+
+
 /**
  * Configuration of GPIO used for sensor reset / sensor interrupt.
  */

HAL_Driver/stm32wb55/inc/stm32wbxx_hal_conf.h

@@ -56,7 +56,7 @@
 #define HAL_SPI_MODULE_ENABLED
 /*#define HAL_TIM_MODULE_ENABLED   */
 /*#define HAL_TSC_MODULE_ENABLED   */
-/*#define HAL_UART_MODULE_ENABLED */
+#define HAL_UART_MODULE_ENABLED
 /* #define HAL_USART_MODULE_ENABLED */
 /*#define HAL_WWDG_MODULE_ENABLED   */
 #define HAL_EXTI_MODULE_ENABLED

HAL_Driver/stm32wb55/src/hal_board.c

@@ -36,6 +36,7 @@ static void dma_init();
 static void system_irq_init();
 
 void stm_spi_init(uint32_t speed_hz);
+void stm_uart_init(uint32_t speed_hz);
 void board_led_init();
 void board_button_init();
 
@@ -60,7 +61,15 @@ fpc_bep_result_t hal_board_init(void *params)
     /* Initialize DMA */
     dma_init();
 
+#ifdef BMLITE_ON_UART
+    stm_uart_init(115200);
+#else
+#ifdef BMLITE_ON_SPI
     stm_spi_init(4000000);
+#else
+   #error "BMLITE_ON_SPI or BMLITE_ON_SPI must be defined"
+#endif
+#endif
 
     if (debugger) {
         HAL_DBGMCU_EnableDBGStandbyMode();

HAL_Driver/stm32wb55/src/hal_buttons.c

@@ -18,7 +18,7 @@
  */
 
 /**
- * @file   button.c
+ * @file   hal_buttons.c
  * @brief  Initialization and access of button.
  */
 

HAL_Driver/stm32wb55/src/hal_leds.c

@@ -18,7 +18,7 @@
  */
 
 /**
- * @file   led.c
+ * @file   hal_leds.c
  * @brief  Initialization and access of LED.
  *
  *  The user LED on the Nucleo-L476RG is using the same pin as SPI SCK (PA5) so the LED

HAL_Driver/stm32wb55/src/hal_spi.c

@@ -18,10 +18,12 @@
  */
 
 /**
- * @file    platform_spi.c
+ * @file    hal_spi.c
- * @brief   SPI functions
+ * @brief   SPI HAL functions
  */
 
+#ifdef BMLITE_ON_SPI
+
 #include "stm32wbxx_hal.h"
 
 #include "bmlite_hal.h"
@@ -246,3 +248,5 @@ void HAL_SPI_TxRxCpltCallback(SPI_HandleTypeDef *hspi)
         spi_rx_tx_done = true;
     }
 }
+
+#endif

HAL_Driver/stm32wb55/src/hal_uart.c

@@ -0,0 +1,359 @@
+/*
+ * Copyright (c) 2020 Fingerprint Cards AB
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *   https://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ *
+ * Modified by Andrey Perminov <andrey.ppp@gmail.com> 
+ * for FPC BM-Lite applications
+ */
+
+/**
+ * @file    hal_uart.c
+ * @brief   UART HAL functions
+ */
+
+#ifdef BMLITE_ON_UART
+
+#include "stm32wbxx_hal.h"
+
+#include "bmlite_hal.h"
+#include "fpc_bep_types.h"
+#include "hal_config.h"
+
+#include <string.h>
+
+#define MIN(X,Y) ((X) < (Y) ? (X) : (Y))
+
+typedef struct
+{
+    volatile uint8_t flag;      /* Timeout event flag */
+    uint16_t prev_cndtr;        /* Holds previous value of DMA_CNDTR (counts down) */
+    uint32_t idle_irq_count;    /* Debug */
+    uint32_t rx_complete_count; /* Debug */
+    uint32_t rx_half_count;     /* Debug */
+} dma_event_t;
+
+UART_HandleTypeDef huart_host = { 0 };
+static DMA_HandleTypeDef hdma_rx = { 0 };
+static DMA_HandleTypeDef hdma_tx = { 0 };
+
+static volatile bool tx_half;
+static volatile bool tx_done;
+static volatile bool error;
+static volatile bool rx_available;
+
+#define DMA_BUF_SIZE   128
+#define DMA_TIMEOUT_MS 2
+
+static uint8_t uart_rx_fifo[DMA_BUF_SIZE];
+static dma_event_t dma_uart_rx = { 0, DMA_BUF_SIZE, 0, 0, 0 };
+
+// static bool tx_active(void)
+// {
+//     return !tx_done;
+// }
+
+// static bool rx_data_available(void)
+// {
+//     bool avail = rx_available;
+
+//     rx_available = false;
+
+//     return avail;
+// }
+
+/**
+ * This function handles Host USART global interrupt.
+ */
+void FPC_BMLITE_USART_IRQ_HANDLER(void)
+{
+    HAL_UART_IRQHandler(&huart_host);
+
+    /* UART IDLE Interrupt */
+    if ((huart_host.Instance->ISR & USART_ISR_IDLE) != RESET) {
+        huart_host.Instance->ICR = UART_CLEAR_IDLEF;
+        dma_uart_rx.flag = 1;
+        dma_uart_rx.idle_irq_count++;
+        if(hdma_rx.XferCpltCallback != NULL) {
+            hdma_rx.XferCpltCallback(&hdma_rx);
+        }
+    }
+}
+
+/**
+ * This function handles Host USART DMA RX global interrupt.
+ */
+void FPC_BMLITE_USART_DMA_IRQ_HANDLER_RX(void)
+{
+    HAL_DMA_IRQHandler(huart_host.hdmarx);
+}
+
+/**
+ * This function handles Host USART DMA TX global interrupt.
+ */
+void FPC_BMLITE_USART_DMA_IRQ_HANDLER_TX(void)
+{
+    HAL_DMA_IRQHandler(huart_host.hdmatx);
+}
+
+/**
+ * USART init function.
+ * @param[in] baudrate Initial baud rate.
+ */
+void stm_uart_init(uint32_t baudrate)
+{
+    // HAL_StatusTypeDef status;
+
+    huart_host.Instance           = FPC_BMLITE_USART;
+    huart_host.Init.BaudRate      = baudrate;
+    huart_host.Init.WordLength    = UART_WORDLENGTH_8B;
+    huart_host.Init.StopBits      = UART_STOPBITS_1;
+    huart_host.Init.Parity        = UART_PARITY_NONE;
+    huart_host.Init.Mode          = UART_MODE_TX_RX;
+    huart_host.Init.HwFlowCtl     = UART_HWCONTROL_NONE;
+    huart_host.Init.OverSampling  = UART_OVERSAMPLING_16;
+    huart_host.Init.ClockPrescaler = UART_PRESCALER_DIV1;
+    huart_host.Init.OneBitSampling          = UART_ONE_BIT_SAMPLE_DISABLE;
+    huart_host.AdvancedInit.AdvFeatureInit  = UART_ADVFEATURE_NO_INIT;
+
+    // huart_host.Init.BaudRate = 921600;
+
+    HAL_UART_Init(&huart_host);
+    HAL_UARTEx_EnableFifoMode(&huart_host);
+
+    /* UART1 IDLE Interrupt Configuration */
+    SET_BIT(FPC_BMLITE_USART->CR1, USART_CR1_IDLEIE);
+
+    hal_timebase_busy_wait(100);
+
+    /* Start UART RX */
+    HAL_UART_Receive_DMA(&huart_host, uart_rx_fifo, DMA_BUF_SIZE);
+}
+
+void uart_host_reinit(void)
+{
+    if (huart_host.Init.BaudRate) {
+        huart_host.Instance->BRR = (uint16_t)(UART_DIV_SAMPLING16(SystemCoreClock,
+                huart_host.Init.BaudRate, huart_host.Init.ClockPrescaler));
+    }
+}
+
+/**
+ * Initialize UART GPIO.
+ * @param[in, out] huart UART Handle.
+ */
+void HAL_UART_MspInit(UART_HandleTypeDef *huart)
+{
+    GPIO_InitTypeDef GPIO_InitStruct = { 0 };
+    // HAL_StatusTypeDef status;
+
+    if (huart->Instance == FPC_BMLITE_USART) {
+        /* Peripheral clock enable */
+        FPC_BMLITE_USART_CLK_ENABLE();
+        FPC_BMLITE_USART_RX_PORT_CLK_ENABLE();
+        FPC_BMLITE_USART_TX_PORT_CLK_ENABLE();
+        __HAL_RCC_GPIOA_CLK_ENABLE();
+        __HAL_RCC_GPIOC_CLK_ENABLE();
+
+        GPIO_InitStruct.Mode        = GPIO_MODE_AF_PP;
+        GPIO_InitStruct.Pull        = GPIO_PULLUP;
+        GPIO_InitStruct.Speed       = GPIO_SPEED_FREQ_MEDIUM;
+        GPIO_InitStruct.Alternate   = FPC_BMLITE_USART_AF;
+
+        GPIO_InitStruct.Pin         = FPC_BMLITE_USART_RX_PIN;
+        HAL_GPIO_Init(FPC_BMLITE_USART_RX_PORT, &GPIO_InitStruct);
+
+        GPIO_InitStruct.Pin         = FPC_BMLITE_USART_TX_PIN;
+        HAL_GPIO_Init(FPC_BMLITE_USART_TX_PORT, &GPIO_InitStruct);
+
+        /* Peripheral DMA init*/
+        hdma_rx.Instance = FPC_BMLITE_USART_DMA_CHANNEL_RX;
+        hdma_rx.Init.Direction = DMA_PERIPH_TO_MEMORY;
+        hdma_rx.Init.PeriphInc = DMA_PINC_DISABLE;
+        hdma_rx.Init.MemInc = DMA_MINC_ENABLE;
+        hdma_rx.Init.PeriphDataAlignment = DMA_PDATAALIGN_BYTE;
+        hdma_rx.Init.MemDataAlignment = DMA_MDATAALIGN_BYTE;
+        hdma_rx.Init.Mode = DMA_CIRCULAR;
+        hdma_rx.Init.Priority = DMA_PRIORITY_VERY_HIGH;
+        hdma_rx.Init.Request = FPC_BMLITE_USART_DMA_REQ_RX;
+
+        HAL_DMA_Init(&hdma_rx);
+        __HAL_LINKDMA(huart, hdmarx, hdma_rx);
+
+        hdma_tx.Instance = FPC_BMLITE_USART_DMA_CHANNEL_TX;
+        hdma_tx.Init.Direction = DMA_MEMORY_TO_PERIPH;
+        hdma_tx.Init.PeriphInc = DMA_PINC_DISABLE;
+        hdma_tx.Init.MemInc = DMA_MINC_ENABLE;
+        hdma_tx.Init.PeriphDataAlignment = DMA_PDATAALIGN_BYTE;
+        hdma_tx.Init.MemDataAlignment = DMA_MDATAALIGN_BYTE;
+        hdma_tx.Init.Mode = DMA_NORMAL;
+        hdma_tx.Init.Priority = DMA_PRIORITY_LOW;
+        hdma_tx.Init.Request = FPC_BMLITE_USART_DMA_REQ_TX;
+
+        HAL_DMA_Init(&hdma_tx);
+        __HAL_LINKDMA(huart, hdmatx, hdma_tx);
+
+        /* UART Host RX DMA interrupt configuration */
+        HAL_NVIC_SetPriority(FPC_BMLITE_USART_DMA_IRQn_RX, 6, 0);
+        HAL_NVIC_EnableIRQ(FPC_BMLITE_USART_DMA_IRQn_RX);
+
+        /* UART Host TX DMA interrupt configuration */
+        HAL_NVIC_SetPriority(FPC_BMLITE_USART_DMA_IRQn_TX, 6, 0);
+        HAL_NVIC_EnableIRQ(FPC_BMLITE_USART_DMA_IRQn_TX);
+
+        /* Peripheral interrupt init*/
+        HAL_NVIC_SetPriority(FPC_BMLITE_USART_IRQn, 1, 0);
+        HAL_NVIC_EnableIRQ(FPC_BMLITE_USART_IRQn);
+
+        HAL_GPIO_WritePin(BMLITE_RST_PORT, BMLITE_RST_PIN, GPIO_PIN_RESET);
+        GPIO_InitStruct.Pin         = BMLITE_RST_PIN;
+        GPIO_InitStruct.Mode        = GPIO_MODE_OUTPUT_PP;
+        GPIO_InitStruct.Pull        = GPIO_PULLUP;
+        GPIO_InitStruct.Speed       = GPIO_SPEED_FREQ_MEDIUM;
+        GPIO_InitStruct.Alternate   = 0;
+        HAL_GPIO_Init(BMLITE_RST_PORT, &GPIO_InitStruct);
+    }
+}
+
+size_t hal_bmlite_uart_write(const uint8_t *data, size_t size)
+{
+    HAL_StatusTypeDef result = HAL_ERROR;
+
+    tx_half = false;
+    tx_done = false;
+    error = false;
+
+    result = HAL_UART_Transmit_DMA(&huart_host, data, size);
+    if (result != HAL_OK) {
+        return 0;
+    }
+
+    while (!tx_done) {
+
+        if (error) {
+            result = HAL_ERROR;
+            return 0;
+        }
+    }
+
+    return size;
+}
+
+size_t hal_bmlite_uart_read(uint8_t *data, size_t size)
+{
+    uint32_t n_sent = 0;
+
+    /* Restart Host UART RX DMA transfer if it has stopped for some reason */
+    if (huart_host.RxState != HAL_UART_STATE_BUSY_RX) {
+        dma_uart_rx.prev_cndtr = DMA_BUF_SIZE;
+        HAL_UART_Receive_DMA(&huart_host, uart_rx_fifo, DMA_BUF_SIZE);
+    }
+
+    if (!size) {
+        return 0;
+    }
+
+    uint16_t curr_cndtr = __HAL_DMA_GET_COUNTER(&hdma_rx);
+
+    if (curr_cndtr != dma_uart_rx.prev_cndtr) {
+        uint32_t cur_pos = DMA_BUF_SIZE - curr_cndtr;
+        uint32_t prev_pos;
+        uint32_t length;
+
+        /* Determine start position in DMA buffer based on previous CNDTR value */
+        prev_pos = DMA_BUF_SIZE - dma_uart_rx.prev_cndtr;
+        if (prev_pos < cur_pos) {
+            length = MIN(cur_pos - prev_pos, size);
+        } else {
+            /* Copy until end of buffer first */
+            length = MIN(DMA_BUF_SIZE - prev_pos, size);
+        }
+        memcpy(data, &uart_rx_fifo[prev_pos], length);
+        data += length;
+        n_sent += length;
+        dma_uart_rx.prev_cndtr -= length;
+        if (dma_uart_rx.prev_cndtr == 0) {
+            dma_uart_rx.prev_cndtr = DMA_BUF_SIZE;
+        }
+        if (prev_pos > cur_pos) {
+            /* Copy from start of buffer */
+            length = MIN(cur_pos, size);
+            memcpy(data, uart_rx_fifo, length);
+            data += length;
+            n_sent += length;
+            dma_uart_rx.prev_cndtr -= length;
+        }
+    } 
+
+    return n_sent;
+
+}
+
+bool uart_host_rx_data_available(void)
+{
+    return rx_available;
+}
+
+void HAL_UART_RxHalfCpltCallback(UART_HandleTypeDef *huart)
+{
+    if (huart->Instance == huart_host.Instance) {
+        rx_available = true;
+        dma_uart_rx.rx_half_count++;
+    }
+}
+
+void HAL_UART_RxCpltCallback(UART_HandleTypeDef *huart)
+{
+    if (huart->Instance == huart_host.Instance) {
+        uint16_t curr_cndtr = __HAL_DMA_GET_COUNTER(huart->hdmarx);
+
+        /*
+         * Ignore IDLE Timeout when the received characters exactly filled up the DMA buffer and
+         * DMA Rx Complete Interrupt is generated, but there is no new character during timeout.
+         */
+        if (dma_uart_rx.flag && curr_cndtr == DMA_BUF_SIZE) {
+            dma_uart_rx.flag = 0;
+            return;
+        }
+
+        if (!dma_uart_rx.flag) {
+            dma_uart_rx.rx_complete_count++;
+        }
+        dma_uart_rx.flag = 0;
+
+        rx_available = true;
+    }
+}
+
+void HAL_UART_TxHalfCpltCallback(UART_HandleTypeDef *huart)
+{
+    if (huart->Instance == huart_host.Instance) {
+        tx_half = true;
+    }
+}
+
+void HAL_UART_TxCpltCallback(UART_HandleTypeDef *huart)
+{
+    if (huart->Instance == huart_host.Instance) {
+        tx_done = true;
+    }
+}
+
+void HAL_UART_ErrorCallback(UART_HandleTypeDef *huart)
+{
+    if (huart->Instance == huart_host.Instance) {
+        error = true;
+    }
+}
+
+#endif

HAL_Driver/stm32wb55/stm32wb55.mk

@@ -63,6 +63,7 @@ LDFLAGS += -T $(HAL)/STM32WB55RGVX_FLASH.ld
 $(OUT)/obj/stm32wbxx_hal_pwr_ex.o: CFLAGS+=-Wno-unused-parameter
 $(OUT)/obj/stm32wbxx_hal_rtc_ex.o: CFLAGS+=-Wno-unused-parameter
 $(OUT)/obj/syscalls.o: CFLAGS+=-Wno-unused-parameter
+$(OUT)/obj/hal_uart.o: CFLAGS+=-Wno-discarded-qualifiers
 
 ifeq ($(FPU),soft)
 AR_LIBS +=\
@@ -87,6 +88,9 @@ HAL_SRCS := \
 	$(SDK_ROOT)/Src/stm32wbxx_hal_rtc.c \
 	$(SDK_ROOT)/Src/stm32wbxx_hal_rtc_ex.c \
 	$(SDK_ROOT)/Src/stm32wbxx_hal_spi.c \
+	$(SDK_ROOT)/Src/stm32wbxx_hal_uart.c \
+	$(SDK_ROOT)/Src/stm32wbxx_hal_uart_ex.c \
+
 
 VPATH += $(dir $(HAL_SRCS))
 C_SRCS += $(notdir $(HAL_SRCS))

README.md

@@ -14,6 +14,7 @@ There are some variables controlling application building:
 APP - defines application
 PLATFORM - defines HW plaform with HAL implementation
 DEBUG - if defined as 'y' will produce debug output and add debug information
+PORT - if defined as UART, BM-Lite HAL will use UART interface. Else will use SPI interface
 
 Not all applications can be built for a particular platform. To build embedded application for nRF52840 platform with additional debug info use:
 
@@ -35,14 +36,17 @@ There are some useful makefile targets:
 
 Platform-independent interface implemented in [platform.c](BMLite_sdk/src/platform.c)
 
-| Platform function | Description  |
+<table>
-| :-------- | :-------- |
+<tr><th> Platform function <th> Description</tr>
-| fpc_bep_result_t **platform_init**(void *params) |  Initilalizes hardware |
+<tr><td> fpc_bep_result_t <b>platform_init</b>(void *params) <td>  Initilalizes hardware </tr>
-| void **platform_bmlite_reset**(void) | Implements BM-Lite HW Reset |
+<tr><td> void <b>platform_bmlite_reset</b>(void) <td> Implements BM-Lite HW Reset </tr>
-| fpc_bep_result_t **platform_bmlite_spi_send**(uint16_t size, const uint8_t *data, uint32_t timeout) | Send data packet to FPC BM-Lite |
+<tr><td> fpc_bep_result_t <b>platform_bmlite_spi_send</b>(uint16_t size, const uint8_t *data, uint32_t timeout) <br> fpc_bep_result_t <b>platform_bmlite_uart_send</b>(uint16_t size, const uint8_t *data, uint32_t timeout) <td> Send data packet to FPC BM-Lite </tr>
-| fpc_bep_result_t **platform_bmlite_spi_receive**(uint16_t size, uint8_t *data, uint32_t timeout) | Receive data packet from FPC BM-Lite. If timeout = **0**, the function will wait for data from BM-Lite indefinitely. The waiting loop will be breaked if **hal_check_button_pressed()** returns non-zero value. It is recommended to do HW or SW reset of BM-Lite if **platform_bmlite_spi_receive()** returns **FPC_BEP_RESULT_TIMEOUT** in order to return is into known state. |
+<tr><td> fpc_bep_result_t <b>platform_bmlite_spi_receive</b>(uint16_t size, uint8_t *data, uint32_t timeout) <br> fpc_bep_result_t <b>platform_bmlite_uart_receive</b>(uint16_t size, uint8_t *data, uint32_t timeout)<td> Receive data packet from FPC BM-Lite. If timeout = <b>0</b>, the function will wait for data from BM-Lite indefinitely. The waiting loop will be breaked if <b>hal_check_button_pressed()</b> returns non-zero value. It is recommended to do HW or SW reset of BM-Lite if <b>platform_bmlite_spi_receive()</b> returns **FPC_BEP_RESULT_TIMEOUT** in order to return is into known state. </tr>
+</table>
 
-Currently **platform_bmlite_uart_send()** and **platform_bmlite_uart_receive()** are not implemented. For UART interface there is no need to wait for **IRQ** pin ready. However because in UART mode there is no signal from FPC-BM-LIte that it will send data, I would recommend to use UART interrupt or DMA to receive data from UART and store it to a separate buffer and read data in **platform_bmlite_uart_receive()** from that buffer. Activation UART data reading only inside **platform_bmlite_uart_receive()** could lead to loosing some incoming data and causing HCP protocol errors.
+
+For UART interface **IRQ/READY** pin is not used, so in UART mode there is no signal from FPC-BM-Lite indicating that BM-Lite is going to send data. To avoid data loss, all data received from UART must be stored into an incoming circular buffer. I would recommend to use UART interrupt or DMA to receive data from UART and store it to the buffer.
+**platform_bmlite_uart_receive()** will read from that buffer when HCP protocol requests to read a data block. Activation UART data reading only inside **platform_bmlite_uart_receive()** will lead to loosing incoming data and causing HCP protocol errors.
 
 ------------
 
@@ -57,6 +61,8 @@ For porting the project to a new microcontroller, all functions from [bmlite_hal
 | fpc_bep_result_t **hal_board_init**(void *params) |  Initialize GPIO, System timer, SPI  |
 | void **hal_bmlite_reset**(bool state) |  Activate/Deactivate BM-Lite **RST_N** pin (***Active Low***) |
 | fpc_bep_result_t **hal_bmlite_spi_write_read**(uint8_t *write, uint8_t *read, size_t size, bool leave_cs_asserted) |  SPI data exchange |
+| size_t **hal_bmlite_uart_write**(const uint8_t *data, size_t size); | Write data to UART interface |
+| size_t **hal_bmlite_uart_read**(uint8_t *buff, size_t size); |  Read data from UART interface |
 | bool **hal_bmlite_get_status**(void) | Return status of BM-Lite **IRQ** pin (***Active High***) |
 | void **hal_timebase_init**(void) |  Initialize system clock with 1 msec tick |
 | uint32_t **hal_timebase_get_tick**(void) | Read currect system clock value |