297 lines
10 KiB
C
297 lines
10 KiB
C
/**
|
|
******************************************************************************
|
|
* @file stm32wbxx_nucleo.h
|
|
* @author MCD Application Team
|
|
* @brief This file contains definitions for:
|
|
* - LEDs and push-button available on STM32WBXX-Nucleo Kit
|
|
* from STMicroelectronics
|
|
******************************************************************************
|
|
* @attention
|
|
*
|
|
* <h2><center>© Copyright (c) 2019 STMicroelectronics.
|
|
* All rights reserved.</center></h2>
|
|
*
|
|
* This software component is licensed by ST under BSD 3-Clause license,
|
|
* the "License"; You may not use this file except in compliance with the
|
|
* License. You may obtain a copy of the License at:
|
|
* opensource.org/licenses/BSD-3-Clause
|
|
*
|
|
******************************************************************************
|
|
*/
|
|
|
|
/* Define to prevent recursive inclusion -------------------------------------*/
|
|
#ifndef __STM32WBXX_NUCLEO_H
|
|
#define __STM32WBXX_NUCLEO_H
|
|
|
|
#ifdef __cplusplus
|
|
extern "C" {
|
|
#endif
|
|
|
|
/** @addtogroup BSP
|
|
* @{
|
|
*/
|
|
|
|
/** @addtogroup STM32WBXX_NUCLEO
|
|
* @{
|
|
*/
|
|
|
|
/* Includes ------------------------------------------------------------------*/
|
|
#include "stm32wbxx_hal.h"
|
|
|
|
/** @defgroup STM32WBXX_NUCLEO_Exported_Types Exported Types
|
|
* @{
|
|
*/
|
|
typedef enum
|
|
{
|
|
LED1 = 0,
|
|
LED2 = 1,
|
|
LED3 = 2,
|
|
/* Color led aliases */
|
|
LED_BLUE = LED1,
|
|
LED_GREEN = LED2,
|
|
LED_RED = LED3
|
|
}Led_TypeDef;
|
|
|
|
typedef enum
|
|
{
|
|
BUTTON_SW1 = 0,
|
|
BUTTON_SW2 = 1,
|
|
BUTTON_SW3 = 2,
|
|
}Button_TypeDef;
|
|
|
|
typedef enum
|
|
{
|
|
BUTTON_MODE_GPIO = 0,
|
|
BUTTON_MODE_EXTI = 1
|
|
}ButtonMode_TypeDef;
|
|
|
|
typedef enum
|
|
{
|
|
JOY_NONE = 0,
|
|
JOY_SEL = 1,
|
|
JOY_DOWN = 2,
|
|
JOY_LEFT = 3,
|
|
JOY_RIGHT = 4,
|
|
JOY_UP = 5
|
|
} JOYState_TypeDef;
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup STM32WBXX_NUCLEO_Exported_Constants Exported Constants
|
|
* @{
|
|
*/
|
|
|
|
/**
|
|
* @brief Define for STM32WBXX_NUCLEO board
|
|
*/
|
|
#if !defined (USE_STM32WBXX_NUCLEO)
|
|
#define USE_STM32WBXX_NUCLEO
|
|
#endif
|
|
|
|
/** @defgroup STM32WBXX_NUCLEO_LED LED Constants
|
|
* @{
|
|
*/
|
|
#define LEDn 3
|
|
|
|
#define LED1_PIN GPIO_PIN_5
|
|
#define LED1_GPIO_PORT GPIOB
|
|
#define LED1_GPIO_CLK_ENABLE() __HAL_RCC_GPIOB_CLK_ENABLE()
|
|
#define LED1_GPIO_CLK_DISABLE() __HAL_RCC_GPIOB_CLK_ENABLE()
|
|
|
|
#define LED2_PIN GPIO_PIN_0
|
|
#define LED2_GPIO_PORT GPIOB
|
|
#define LED2_GPIO_CLK_ENABLE() __HAL_RCC_GPIOB_CLK_ENABLE()
|
|
#define LED2_GPIO_CLK_DISABLE() __HAL_RCC_GPIOB_CLK_ENABLE()
|
|
|
|
#define LED3_PIN GPIO_PIN_1
|
|
#define LED3_GPIO_PORT GPIOB
|
|
#define LED3_GPIO_CLK_ENABLE() __HAL_RCC_GPIOB_CLK_ENABLE()
|
|
#define LED3_GPIO_CLK_DISABLE() __HAL_RCC_GPIOB_CLK_ENABLE()
|
|
|
|
#define LEDx_GPIO_CLK_ENABLE(__INDEX__) __HAL_RCC_GPIOB_CLK_ENABLE() /* All Led on same port */
|
|
#define LEDx_GPIO_CLK_DISABLE(__INDEX__) __HAL_RCC_GPIOB_CLK_ENABLE() /* All Led on same port */
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup STM32WBXX_NUCLEO_BUTTON BUTTON Constants
|
|
* @{
|
|
*/
|
|
#define BUTTONn 3
|
|
|
|
/**
|
|
* @brief Key push-button
|
|
*/
|
|
#define BUTTON_SW1_PIN GPIO_PIN_4
|
|
#define BUTTON_SW1_GPIO_PORT GPIOC
|
|
#define BUTTON_SW1_GPIO_CLK_ENABLE() __HAL_RCC_GPIOC_CLK_ENABLE()
|
|
#define BUTTON_SW1_GPIO_CLK_DISABLE() __HAL_RCC_GPIOC_CLK_DISABLE()
|
|
#define BUTTON_SW1_EXTI_LINE GPIO_PIN_4
|
|
#define BUTTON_SW1_EXTI_IRQn EXTI4_IRQn
|
|
|
|
#define BUTTON_SW2_PIN GPIO_PIN_0
|
|
#define BUTTON_SW2_GPIO_PORT GPIOD
|
|
#define BUTTON_SW2_GPIO_CLK_ENABLE() __HAL_RCC_GPIOD_CLK_ENABLE()
|
|
#define BUTTON_SW2_GPIO_CLK_DISABLE() __HAL_RCC_GPIOD_CLK_DISABLE()
|
|
#define BUTTON_SW2_EXTI_LINE GPIO_PIN_0
|
|
#define BUTTON_SW2_EXTI_IRQn EXTI0_IRQn
|
|
|
|
#define BUTTON_SW3_PIN GPIO_PIN_1
|
|
#define BUTTON_SW3_GPIO_PORT GPIOD
|
|
#define BUTTON_SW3_GPIO_CLK_ENABLE() __HAL_RCC_GPIOD_CLK_ENABLE()
|
|
#define BUTTON_SW3_GPIO_CLK_DISABLE() __HAL_RCC_GPIOD_CLK_DISABLE()
|
|
#define BUTTON_SW3_EXTI_LINE GPIO_PIN_1
|
|
#define BUTTON_SW3_EXTI_IRQn EXTI1_IRQn
|
|
|
|
#define BUTTONx_GPIO_CLK_ENABLE(__INDEX__) do { if ((__INDEX__) == BUTTON_SW1) BUTTON_SW1_GPIO_CLK_ENABLE(); else \
|
|
if ((__INDEX__) == BUTTON_SW2) BUTTON_SW2_GPIO_CLK_ENABLE(); else \
|
|
if ((__INDEX__) == BUTTON_SW3) BUTTON_SW3_GPIO_CLK_ENABLE();} while(0)
|
|
|
|
#define BUTTONx_GPIO_CLK_DISABLE(__INDEX__) do { if ((__INDEX__) == BUTTON_SW1) BUTTON_SW1_GPIO_CLK_DISABLE(); else \
|
|
if ((__INDEX__) == BUTTON_SW2) BUTTON_SW2_GPIO_CLK_DISABLE(); else \
|
|
if ((__INDEX__) == BUTTON_SW3) BUTTON_SW3_GPIO_CLK_DISABLE();} while(0)
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @addtogroup STM32WBXX_NUCLEO_BUS BUS Constants
|
|
* @{
|
|
*/
|
|
/*###################### SPI1 ###################################*/
|
|
#define NUCLEO_SPIx SPI1
|
|
#define NUCLEO_SPIx_CLK_ENABLE() __HAL_RCC_SPI1_CLK_ENABLE()
|
|
|
|
#define NUCLEO_SPIx_SCK_AF GPIO_AF5_SPI1
|
|
#define NUCLEO_SPIx_SCK_GPIO_PORT GPIOA
|
|
#define NUCLEO_SPIx_SCK_PIN GPIO_PIN_5
|
|
#define NUCLEO_SPIx_SCK_GPIO_CLK_ENABLE() __HAL_RCC_GPIOA_CLK_ENABLE()
|
|
#define NUCLEO_SPIx_SCK_GPIO_CLK_DISABLE() __HAL_RCC_GPIOA_CLK_DISABLE()
|
|
|
|
#define NUCLEO_SPIx_MISO_MOSI_AF GPIO_AF5_SPI1
|
|
#define NUCLEO_SPIx_MISO_MOSI_GPIO_PORT GPIOA
|
|
#define NUCLEO_SPIx_MISO_MOSI_GPIO_CLK_ENABLE() __HAL_RCC_GPIOA_CLK_ENABLE()
|
|
#define NUCLEO_SPIx_MISO_MOSI_GPIO_CLK_DISABLE() __HAL_RCC_GPIOA_CLK_DISABLE()
|
|
#define NUCLEO_SPIx_MISO_PIN GPIO_PIN_6
|
|
#define NUCLEO_SPIx_MOSI_PIN GPIO_PIN_7
|
|
/* Maximum Timeout values for flags waiting loops. These timeouts are not based
|
|
on accurate values, they just guarantee that the application will not remain
|
|
stuck if the SPI communication is corrupted.
|
|
You may modify these timeout values depending on CPU frequency and application
|
|
conditions (interrupts routines ...). */
|
|
#define NUCLEO_SPIx_TIMEOUT_MAX 1000
|
|
|
|
|
|
/**
|
|
* @brief SD Control Lines management
|
|
*/
|
|
#define SD_CS_LOW() HAL_GPIO_WritePin(SD_CS_GPIO_PORT, SD_CS_PIN, GPIO_PIN_RESET)
|
|
#define SD_CS_HIGH() HAL_GPIO_WritePin(SD_CS_GPIO_PORT, SD_CS_PIN, GPIO_PIN_SET)
|
|
|
|
/**
|
|
* @brief LCD Control Lines management
|
|
*/
|
|
#define LCD_CS_LOW() HAL_GPIO_WritePin(LCD_CS_GPIO_PORT, LCD_CS_PIN, GPIO_PIN_RESET)
|
|
#define LCD_CS_HIGH() HAL_GPIO_WritePin(LCD_CS_GPIO_PORT, LCD_CS_PIN, GPIO_PIN_SET)
|
|
#define LCD_DC_LOW() HAL_GPIO_WritePin(LCD_DC_GPIO_PORT, LCD_DC_PIN, GPIO_PIN_RESET)
|
|
#define LCD_DC_HIGH() HAL_GPIO_WritePin(LCD_DC_GPIO_PORT, LCD_DC_PIN, GPIO_PIN_SET)
|
|
|
|
/**
|
|
* @brief SD Control Interface pins
|
|
*/
|
|
#define SD_CS_PIN GPIO_PIN_10
|
|
#define SD_CS_GPIO_PORT GPIOC
|
|
#define SD_CS_GPIO_CLK_ENABLE() __HAL_RCC_GPIOC_CLK_ENABLE()
|
|
#define SD_CS_GPIO_CLK_DISABLE() __HAL_RCC_GPIOC_CLK_DISABLE()
|
|
|
|
/**
|
|
* @brief LCD Control Interface pins
|
|
*/
|
|
#define LCD_CS_PIN GPIO_PIN_4
|
|
#define LCD_CS_GPIO_PORT GPIOA
|
|
#define LCD_CS_GPIO_CLK_ENABLE() __HAL_RCC_GPIOA_CLK_ENABLE()
|
|
#define LCD_CS_GPIO_CLK_DISABLE() __HAL_RCC_GPIOA_CLK_DISABLE()
|
|
|
|
/**
|
|
* @brief LCD Data/Command Interface pins
|
|
*/
|
|
#define LCD_DC_PIN GPIO_PIN_12
|
|
#define LCD_DC_GPIO_PORT GPIOC
|
|
#define LCD_DC_GPIO_CLK_ENABLE() __HAL_RCC_GPIOC_CLK_ENABLE()
|
|
#define LCD_DC_GPIO_CLK_DISABLE() __HAL_RCC_GPIOC_CLK_DISABLE()
|
|
|
|
/*##################### ADC1 ###################################*/
|
|
/**
|
|
* @brief ADC Interface pins
|
|
* used to detect motion of Joystick available on Adafruit 1.8" TFT shield
|
|
*/
|
|
#define NUCLEO_ADCx ADC1
|
|
#define NUCLEO_ADCx_CLK_ENABLE() __HAL_RCC_ADC_CLK_ENABLE()
|
|
|
|
#define NUCLEO_ADCx_GPIO_PORT GPIOA
|
|
#define NUCLEO_ADCx_GPIO_PIN GPIO_PIN_0
|
|
#define NUCLEO_ADCx_GPIO_CLK_ENABLE() __HAL_RCC_GPIOA_CLK_ENABLE()
|
|
#define NUCLEO_ADCx_GPIO_CLK_DISABLE() __HAL_RCC_GPIOA_CLK_DISABLE()
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @addtogroup STM32WBXX_NUCLEO_Exported_Functions
|
|
* @{
|
|
*/
|
|
uint32_t BSP_GetVersion(void);
|
|
|
|
/** @addtogroup STM32WBXX_NUCLEO_LED_Functions
|
|
* @{
|
|
*/
|
|
void BSP_LED_Init(Led_TypeDef Led);
|
|
void BSP_LED_DeInit(Led_TypeDef Led);
|
|
void BSP_LED_On(Led_TypeDef Led);
|
|
void BSP_LED_Off(Led_TypeDef Led);
|
|
void BSP_LED_Toggle(Led_TypeDef Led);
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @addtogroup STM32WBXX_NUCLEO_BUTTON_Functions
|
|
* @{
|
|
*/
|
|
void BSP_PB_Init(Button_TypeDef Button, ButtonMode_TypeDef ButtonMode);
|
|
void BSP_PB_DeInit(Button_TypeDef Button);
|
|
uint32_t BSP_PB_GetState(Button_TypeDef Button);
|
|
#ifdef HAL_ADC_MODULE_ENABLED
|
|
uint8_t BSP_JOY_Init(void);
|
|
JOYState_TypeDef BSP_JOY_GetState(void);
|
|
#endif /* HAL_ADC_MODULE_ENABLED */
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
#ifdef __cplusplus
|
|
}
|
|
#endif
|
|
|
|
#endif /* __STM32WBXX_NUCLEO_H */
|
|
|
|
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
|
|