andpp/mopidy
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity

docs: Update gst-{launch,inspect}-{0.10 => 1.0}

Browse Source
This commit is contained in:
Stein Magnus Jodal 2016-02-03 22:24:17 +01:00
parent c749647a7b
commit 30b50b64d3
1 changed files with 12 additions and 12 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

24
docs/config.rst
View File

@ -150,8 +150,8 @@ Audio configuration
Expects a GStreamer sink. Typical values are ``autoaudiosink``,
``alsasink``, ``osssink``, ``oss4sink``, ``pulsesink``, and ``shout2send``,
and additional arguments specific to each sink. You can use the command
``gst-inspect-0.10`` to see what output properties can be set on the sink.
For example: ``gst-inspect-0.10 shout2send``
``gst-inspect-1.0`` to see what output properties can be set on the sink.
For example: ``gst-inspect-1.0 shout2send``
Logging configuration
---------------------
@ -260,17 +260,17 @@ Advanced configurations
Custom audio sink
-----------------
If you have successfully installed GStreamer, and then run the ``gst-inspect``
or ``gst-inspect-0.10`` command, you should see a long listing of installed
If you have successfully installed GStreamer, and then run the
``gst-inspect-1.0`` command, you should see a long listing of installed
plugins, ending in a summary line::
$ gst-inspect-0.10
$ gst-inspect-1.0
... long list of installed plugins ...
Total count: 254 plugins (1 blacklist entry not shown), 1156 features
Total count: 233 plugins, 1339 features
Next, you should be able to produce a audible tone by running::
gst-launch-0.10 audiotestsrc ! audioresample ! autoaudiosink
gst-launch-1.0 audiotestsrc ! audioresample ! autoaudiosink
If you cannot hear any sound when running this command, you won't hear any
sound from Mopidy either, as Mopidy by default uses GStreamer's
@ -289,10 +289,10 @@ Example ``mopidy.conf`` for using OSS4:
[audio]
output = oss4sink
Again, this is the equivalent of the following ``gst-inspect`` command, so make
this work first::
Again, this is the equivalent of the following ``gst-launch-1.0`` command, so
make this work first::
gst-launch-0.10 audiotestsrc ! audioresample ! oss4sink
gst-launch-1.0 audiotestsrc ! audioresample ! oss4sink
Streaming through SHOUTcast/Icecast
@ -317,7 +317,7 @@ server simultaneously. To use the SHOUTcast output, do the following:
An Ogg Vorbis encoder could be used instead of the lame MP3 encoder.
#. You might also need to change the ``shout2send`` default settings, run
``gst-inspect-0.10 shout2send`` to see the available settings. Most likely
``gst-inspect-1.0 shout2send`` to see the available settings. Most likely
you want to change ``ip``, ``username``, ``password``, and ``mount``.
Example for MP3 streaming:
@ -335,7 +335,7 @@ server simultaneously. To use the SHOUTcast output, do the following:
output = audioresample ! audioconvert ! vorbisenc ! oggmux ! shout2send mount=mopidy ip=127.0.0.1 port=8000 password=hackme
Other advanced setups are also possible for outputs. Basically, anything you
can use with the ``gst-launch-0.10`` command can be plugged into
can use with the ``gst-launch-1.0`` command can be plugged into
:confval:`audio/output`.
.. _workaround: