.. _installation:

************
Installation
************

There are several ways to install Mopidy. What way is best depends upon your OS
and/or distribution. If you want to contribute to the development of Mopidy,
you should first read this page, then have a look at :ref:`run-from-git`.

.. contents:: Installation guides
    :local:


Debian/Ubuntu: Install from apt.mopidy.com
==========================================

If you run a Debian based Linux distribution, like Ubuntu, the easiest way to
install Mopidy is from the `Mopidy APT archive <http://apt.mopidy.com/>`_. When
installing from the APT archive, you will automatically get updates to Mopidy
in the same way as you get updates to the rest of your distribution.

#. Add the archive's GPG key::

       wget -q -O - http://apt.mopidy.com/mopidy.gpg | sudo apt-key add -

#. Add the following to ``/etc/apt/sources.list``, or if you have the directory
   ``/etc/apt/sources.list.d/``, add it to a file called ``mopidy.list`` in
   that directory::

       # Mopidy APT archive
       deb http://apt.mopidy.com/ stable main contrib non-free
       deb-src http://apt.mopidy.com/ stable main contrib non-free

   For the lazy, you can simply run the following command to create
   ``/etc/apt/sources.list.d/mopidy.list``::

       sudo wget -q -O /etc/apt/sources.list.d/mopidy.list http://apt.mopidy.com/mopidy.list

#. Install Mopidy and all dependencies::

       sudo apt-get update
       sudo apt-get install mopidy

#. Finally, you need to set a couple of :doc:`settings </settings>`, and then
   you're ready to :doc:`run Mopidy </running>`.

When a new release of Mopidy is out, and you can't wait for you system to
figure it out for itself, run the following to upgrade right away::

    sudo apt-get update
    sudo apt-get dist-upgrade


Raspberry Pi running Debian
---------------------------

Fred Hatfull has created a guide for installing a Raspberry Pi from scratch
with Debian and Mopidy. See :ref:`raspberrypi-installation`.


Vagrant virtual machine running Ubuntu
--------------------------------------

Paul Sturgess has created a Vagrant and Chef setup that automatically creates
and sets up a virtual machine which runs Mopidy. Check out
https://github.com/paulsturgess/mopidy-vagrant if you're interested in trying
it out.


Arch Linux: Install from AUR
============================

If you are running Arch Linux, you can install a development snapshot of Mopidy
using the `mopidy-git <https://aur.archlinux.org/packages/mopidy-git/>`_
package found in AUR.

#. To install Mopidy with GStreamer, libspotify and pyspotify, you can use
   ``packer``, ``yaourt``, or do it by hand like this::

       wget http://aur.archlinux.org/packages/mopidy-git/mopidy-git.tar.gz
       tar xf mopidy-git.tar.gz
       cd mopidy-git/
       makepkg -si

   To upgrade Mopidy to future releases, just rerun ``makepkg``.

#. Optional: If you want to scrobble your played tracks to Last.fm, you need to
   install `python2-pylast
   <https://aur.archlinux.org/packages/python2-pylast/>`_ from AUR.

#. Finally, you need to set a couple of :doc:`settings </settings>`, and then
   you're ready to :doc:`run Mopidy </running>`.


OS X: Install from Homebrew and Pip
===================================

If you are running OS X, you can install everything needed with Homebrew and
Pip.

#. Install `Homebrew <https://github.com/mxcl/homebrew>`_.

   If you are already using Homebrew, make sure your installation is up to
   date before you continue::

       brew update
       brew upgrade

#. Install the required packages from Homebrew::

       brew install gst-python gst-plugins-good gst-plugins-ugly libspotify

#. Make sure to include Homebrew's Python ``site-packages`` directory in your
   ``PYTHONPATH``. If you don't include this, Mopidy will not find GStreamer
   and crash.

   You can either amend your ``PYTHONPATH`` permanently, by adding the
   following statement to your shell's init file, e.g. ``~/.bashrc``::

       export PYTHONPATH=$(brew --prefix)/lib/python2.7/site-packages:$PYTHONPATH

   Or, you can prefix the Mopidy command every time you run it::

       PYTHONPATH=$(brew --prefix)/lib/python2.7/site-packages mopidy

   Note that you need to replace ``python2.7`` with ``python2.6`` in the above
   ``PYTHONPATH`` examples if you are using Python 2.6. To find your Python
   version, run::

       python --version

#. Next up, you need to install some Python packages. To do so, we use Pip. If
   you don't have the ``pip`` command, you can install it now::

       sudo easy_install pip

#. Then get, build, and install the latest releast of pyspotify, pylast, pykka,
   and Mopidy using Pip::

       sudo pip install -U pyspotify pylast pykka mopidy

#. Finally, you need to set a couple of :doc:`settings </settings>`, and then
   you're ready to :doc:`run Mopidy </running>`.


Otherwise: Install from source using Pip
========================================

If you are on on Linux, but can't install from the APT archive or from AUR, you
can install Mopidy from PyPI using Pip.

#. First of all, you need Python >= 2.6, < 3. Check if you have Python and what
   version by running::

       python --version

#. When you install using Pip, you need to make sure you have Pip. You'll also
   need a C compiler and the Python development headers to build pyspotify
   later.

   This is how you install it on Debian/Ubuntu::

       sudo apt-get install build-essential python-dev python-pip

   And on Arch Linux from the official repository::

       sudo pacman -S base-devel python2-pip

   And on Fedora Linux from the official repositories::

       sudo yum install -y gcc python-devel python-pip

#. Then you'll need to install all of Mopidy's hard dependencies:

   - Pykka >= 1.0::

         sudo pip install -U pykka

     On Fedora the binary is called ``pip-python``::

         sudo pip-python install -U pykka

   - GStreamer 0.10.x, with Python bindings. GStreamer is packaged for most
     popular Linux distributions. Search for GStreamer in your package manager,
     and make sure to install the Python bindings, and the "good" and "ugly"
     plugin sets.

     If you use Debian/Ubuntu you can install GStreamer like this::

         sudo apt-get install python-gst0.10 gstreamer0.10-plugins-good \
             gstreamer0.10-plugins-ugly gstreamer0.10-tools

     If you use Arch Linux, install the following packages from the official
     repository::

         sudo pacman -S gstreamer0.10-python gstreamer0.10-good-plugins \
             gstreamer0.10-ugly-plugins

     If you use Fedora you can install GStreamer like this::

         sudo yum install -y python-gst0.10 gstreamer0.10-plugins-good \
             gstreamer0.10-plugins-ugly gstreamer0.10-tools

#. Optional: If you want Spotify support in Mopidy, you'll need to install
   libspotify and the Python bindings, pyspotify.

   #. First, check `pyspotify's changelog <http://pyspotify.mopidy.com/>`_ to
      see what's the latest version of libspotify which it supports. The
      versions of libspotify and pyspotify are tightly coupled, so you'll need
      to get this right.

   #. Download and install the appropriate version of libspotify for your OS
      and CPU architecture from `Spotify
      <https://developer.spotify.com/technologies/libspotify/>`_.

      For libspotify 12.1.51 for 64-bit Linux the process is as follows::

          wget https://developer.spotify.com/download/libspotify/libspotify-12.1.51-Linux-x86_64-release.tar.gz
          tar zxfv libspotify-12.1.51-Linux-x86_64-release.tar.gz
          cd libspotify-12.1.51-Linux-x86_64-release/
          sudo make install prefix=/usr/local
          sudo ldconfig

      Remember to adjust the above example for the latest libspotify version
      supported by pyspotify, your OS, and your CPU architecture.

   #. If you're on Fedora, you must add a configuration file so libspotify.so
      can be found::

          su -c 'echo "/usr/local/lib" > /etc/ld.so.conf.d/libspotify.conf'
          sudo ldconfig

   #. Then get, build, and install the latest release of pyspotify using Pip::

          sudo pip install -U pyspotify

          # Fedora:
          sudo pip-python install -U pyspotify

#. Optional: If you want to scrobble your played tracks to Last.fm, you need
   pylast::

      sudo pip install -U pylast

      # Fedora:
      sudo pip-python install -U pylast

#. Optional: To use MPRIS, e.g. for controlling Mopidy from the Ubuntu Sound
   Menu or from an UPnP client via Rygel, you need some additional
   dependencies: the Python bindings for libindicate, and the Python bindings
   for libdbus, the reference D-Bus library.

   On Debian/Ubuntu::

       sudo apt-get install python-dbus python-indicate

#. Then, to install the latest release of Mopidy::

       sudo pip install -U mopidy

       # Fedora:
       sudo pip-python install -U mopidy

   To upgrade Mopidy to future releases, just rerun this command.

   Alternatively, if you want to track Mopidy development closer, you may
   install a snapshot of Mopidy's ``develop`` Git branch using Pip::

        sudo pip install mopidy==dev

#. Finally, you need to set a couple of :doc:`settings </settings>`, and then
   you're ready to :doc:`run Mopidy </running>`.