80 lines
4.4 KiB
Markdown
80 lines
4.4 KiB
Markdown
## FPC BM-Lite example application
|
|
|
|
There are 3 main folders in the project:
|
|
- [BMLite_examples](BMLite_examples) - HW-independed application examples
|
|
- [BMLite_sdk](BMLite_sdk) - FPC BM-Lite SDK
|
|
- [HAL_Driver](HAL_Driver) - implementation of HW-dependent functions
|
|
|
|
------------
|
|
|
|
## Build system
|
|
|
|
There are some variables controlling application building:
|
|
|
|
APP - defines application
|
|
PLATFORM - defines HW plaform with HAL implementation
|
|
DEBUG - if defined as 'y' will produce debug output and add debug information
|
|
|
|
Not all applications can be built for a particular platform. To build embedded application for nRF52840 platform with additional debug info use:
|
|
|
|
`make APP=embedded_app PLATFORM=nRF52840 DEBUG=y`
|
|
|
|
There are some useful makefile targets:
|
|
|
|
- Show all available applications:
|
|
`make list_apps`
|
|
- Show all available platforms:
|
|
`make list_hals`
|
|
- Clean output for particular application and platform:
|
|
`make PLATFORM=nRF52840 APP=embedded_app clean`
|
|
- Clean output for all applications and platforms:
|
|
`make clean_all`
|
|
|
|
|
|
### Platform-independent interface functions
|
|
|
|
Platform-independent interface implemented in [platform.c](BMLite_sdk/src/platform.c)
|
|
|
|
| Platform function | Description |
|
|
| :-------- | :-------- |
|
|
| fpc_bep_result_t **platform_init**(void *params) | Initilalizes hardware |
|
|
| void **platform_bmlite_reset**(void) | Implements BM-Lite HW Reset |
|
|
| fpc_bep_result_t **platform_bmlite_send**(uint16_t size, const uint8_t *data, uint32_t timeout, void *session) | Send data packet to FPC BM-Lite |
|
|
| fpc_bep_result_t **platform_bmlite_receive**(uint16_t size, uint8_t *data, uint32_t timeout, void *session) | Receive data packet from FPC BM-Lite. If timeout = **0**, the function will wait for data from BM-Lite indefinitely. The waiting loop will be breaked if **hal_check_button_pressed()** returns non-zero value. It is recommended to do HW or SW reset of BM-Lite if **platform_bmlite_receive()** returns **FPC_BEP_RESULT_TIMEOUT** in order to return is into known state. |
|
|
|
|
Currently **platform_bmlite_send()** and **platform_bmlite_receive()** are implemented for SPI interface. For UART interface there is no need to wait for **IRQ** pin ready. However because in UART mode there is no signal from FPC-BM-LIte that it will send data, I would recommend to use UART interrupt or DMA to receive data from UART and store it to a separate buffer and read data in **platform_bmlite_receive()** from that buffer. Activation UART data reading only inside **platform_bmlite_receive()** could lead to loosing some incoming data and causing HCP protocol errors.
|
|
|
|
------------
|
|
|
|
### HAL implementation
|
|
|
|
For porting the project to a new microcontroller, all functions from [bmlite_hal.h](BMLite_sdk/inc/bmlite_hal.h) should be implemented.
|
|
|
|
#### Functions must be implemented:
|
|
|
|
| HAL Function | Description |
|
|
| :------------ | :------------ |
|
|
| fpc_bep_result_t **hal_board_init**(void *params) | Initialize GPIO, System timer, SPI |
|
|
| void **hal_bmlite_reset**(bool state) | Activate/Deactivate BM-Lite **RST_N** pin (***Active Low***) |
|
|
| fpc_bep_result_t **hal_bmlite_spi_write_read**(uint8_t *write, uint8_t *read, size_t size, bool leave_cs_asserted) | SPI data exchange |
|
|
| bool **hal_bmlite_get_status**(void) | Return status of BM-Lite **IRQ** pin (***Active High***) |
|
|
| void **hal_timebase_init**(void) | Initialize system clock with 1 msec tick |
|
|
| uint32_t **hal_timebase_get_tick**(void) | Read currect system clock value |
|
|
| void **hal_timebase_busy_wait**(uint32_t ms) | Delay for **ms** msec |
|
|
|
|
#### Optional functions for implementing user interface in BM-Lite example application:
|
|
|
|
| HAL Function | Description |
|
|
| :------------ | :------------ |
|
|
| uint32_t **hal_get_button_press_time**(void) | How long UI button was pressed last time. Also it should reset button pressed time counter |
|
|
| uint32_t **hal_check_button_pressed**(void) | Used for breaking waiting in **platform_bmlite_receive()** if returns non-zero |
|
|
| void **hal_set_leds**(platform_led_status_t status, uint16_t mode) | Set LED(s) state according to status and mode. |
|
|
|
|
------------
|
|
|
|
### Some notes about FPC BM-Lite HW interface
|
|
|
|
- BM-Lite support both UART and SPI communication interface. BM-Lite automatically detects the specific communication interface in use. However, it is not possible to use both interfaces at the same time!
|
|
- **IRQ** pin is used in SPI mode only as FPC BM-Lite Ready-to-Transmit signal. The module set it to **High** when it has some data to send and set it to **Low** when data packet is sent.
|
|
|