andpp/mopidy
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity

docs: Move advanced audio setups out of config page

Browse Source
This commit is contained in:
Stein Magnus Jodal 2016-02-03 23:11:18 +01:00
parent 30b50b64d3
commit 851c206d45
3 changed files with 132 additions and 127 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

106
docs/audio.rst Normal file
View File

@ -0,0 +1,106 @@
.. _audio:
*********************
Advanced audio setups
*********************
Custom audio sink
=================
If you have successfully installed GStreamer, and then run the
``gst-inspect-1.0`` command, you should see a long listing of installed
plugins, ending in a summary line::
$ gst-inspect-1.0
... long list of installed plugins ...
Total count: 233 plugins, 1339 features
Next, you should be able to produce a audible tone by running::
gst-launch-1.0 audiotestsrc ! audioresample ! autoaudiosink
If you cannot hear any sound when running this command, you won't hear any
sound from Mopidy either, as Mopidy by default uses GStreamer's
``autoaudiosink`` to play audio. Thus, make this work before you file a bug
against Mopidy.
If you for some reason want to use some other GStreamer audio sink than
``autoaudiosink``, you can set the :confval:`audio/output` config value to a
partial GStreamer pipeline description describing the GStreamer sink you want
to use.
Example ``mopidy.conf`` for using OSS4:
.. code-block:: ini
[audio]
output = oss4sink
Again, this is the equivalent of the following ``gst-launch-1.0`` command, so
make this work first::
gst-launch-1.0 audiotestsrc ! audioresample ! oss4sink
Streaming through SHOUTcast/Icecast
===================================
.. warning:: Known issue
Currently, Mopidy does not handle end-of-track vs end-of-stream signalling
in GStreamer correctly. This causes the SHOUTcast stream to be disconnected
at the end of each track, rendering it quite useless. For further details,
see :issue:`492`. You can also try the workaround_ mentioned below.
If you want to play the audio on another computer than the one running Mopidy,
you can stream the audio from Mopidy through an SHOUTcast or Icecast audio
streaming server. Multiple media players can then be connected to the streaming
server simultaneously. To use the SHOUTcast output, do the following:
#. Install, configure and start the Icecast server. It can be found in the
``icecast2`` package in Debian/Ubuntu.
#. Set the :confval:`audio/output` config value to ``lamemp3enc ! shout2send``.
An Ogg Vorbis encoder could be used instead of the lame MP3 encoder.
#. You might also need to change the ``shout2send`` default settings, run
``gst-inspect-1.0 shout2send`` to see the available settings. Most likely
you want to change ``ip``, ``username``, ``password``, and ``mount``.
Example for MP3 streaming:
.. code-block:: ini
[audio]
output = lamemp3enc ! shout2send mount=mopidy ip=127.0.0.1 port=8000 password=hackme
Example for Ogg Vorbis streaming:
.. code-block:: ini
[audio]
output = audioresample ! audioconvert ! vorbisenc ! oggmux ! shout2send mount=mopidy ip=127.0.0.1 port=8000 password=hackme
Other advanced setups are also possible for outputs. Basically, anything you
can use with the ``gst-launch-1.0`` command can be plugged into
:confval:`audio/output`.
.. _workaround:
**Workaround for end-of-track issues - fallback streams**
By using a *fallback stream* playing silence, you can somewhat mitigate the
signalling issues.
Example Icecast configuration:
.. code-block:: xml
<mount>
<mount-name>/mopidy</mount-name>
<fallback-mount>/silence.mp3</fallback-mount>
<fallback-override>1</fallback-override>
</mount>
The ``silence.mp3`` file needs to be placed in the directory defined by
``<webroot>...</webroot>``.

152
docs/config.rst
View File

@ -49,21 +49,18 @@ below, together with their default values. In addition, all :ref:`extensions
defaults are documented on the :ref:`extension pages <ext>`.
Default core configuration
==========================
Default configuration
=====================
This is the default configuration for Mopidy itself. All extensions bring
additional configuration values with their own defaults.
.. literalinclude:: ../mopidy/config/default.conf
:language: ini
Core configuration values
=========================
Mopidy's core has the following configuration values that you can change.
Core configuration
------------------
Core config section
===================
.. confval:: core/cache_dir
@ -116,7 +113,10 @@ Core configuration
Audio configuration
-------------------
===================
These are the available audio configurations. For specific use cases, see
:ref:`audio`.
.. confval:: audio/mixer
@ -153,8 +153,9 @@ Audio configuration
``gst-inspect-1.0`` to see what output properties can be set on the sink.
For example: ``gst-inspect-1.0 shout2send``
Logging configuration
---------------------
=====================
.. confval:: logging/color
@ -205,7 +206,7 @@ Logging configuration
.. _proxy-config:
Proxy configuration
-------------------
===================
Not all parts of Mopidy or all Mopidy extensions respect the proxy
server configuration when connecting to the Internet. Currently, this is at
@ -239,9 +240,10 @@ these configurations to help users on locked down networks.
Extension configuration
=======================
Mopidy's extensions have their own config values that you may want to tweak.
For the available config values, please refer to the docs for each extension.
Most, if not all, can be found at :ref:`ext`.
Each installed Mopidy extension adds its own configuration section with one or
more config values that you may want to tweak. For the available config
values, please refer to the docs for each extension. Most, if not all, can be
found at :ref:`ext`.
Mopidy extensions are enabled by default when they are installed. If you want
to disable an extension without uninstalling it, all extensions support the
@ -254,118 +256,14 @@ following to your ``mopidy.conf``::
enabled = false
Advanced configurations
=======================
Adding new configuration values
===============================
Custom audio sink
-----------------
If you have successfully installed GStreamer, and then run the
``gst-inspect-1.0`` command, you should see a long listing of installed
plugins, ending in a summary line::
$ gst-inspect-1.0
... long list of installed plugins ...
Total count: 233 plugins, 1339 features
Next, you should be able to produce a audible tone by running::
gst-launch-1.0 audiotestsrc ! audioresample ! autoaudiosink
If you cannot hear any sound when running this command, you won't hear any
sound from Mopidy either, as Mopidy by default uses GStreamer's
``autoaudiosink`` to play audio. Thus, make this work before you file a bug
against Mopidy.
If you for some reason want to use some other GStreamer audio sink than
``autoaudiosink``, you can set the :confval:`audio/output` config value to a
partial GStreamer pipeline description describing the GStreamer sink you want
to use.
Example ``mopidy.conf`` for using OSS4:
.. code-block:: ini
[audio]
output = oss4sink
Again, this is the equivalent of the following ``gst-launch-1.0`` command, so
make this work first::
gst-launch-1.0 audiotestsrc ! audioresample ! oss4sink
Streaming through SHOUTcast/Icecast
-----------------------------------
.. warning:: Known issue
Currently, Mopidy does not handle end-of-track vs end-of-stream signalling
in GStreamer correctly. This causes the SHOUTcast stream to be disconnected
at the end of each track, rendering it quite useless. For further details,
see :issue:`492`. You can also try the workaround_ mentioned below.
If you want to play the audio on another computer than the one running Mopidy,
you can stream the audio from Mopidy through an SHOUTcast or Icecast audio
streaming server. Multiple media players can then be connected to the streaming
server simultaneously. To use the SHOUTcast output, do the following:
#. Install, configure and start the Icecast server. It can be found in the
``icecast2`` package in Debian/Ubuntu.
#. Set the :confval:`audio/output` config value to ``lamemp3enc ! shout2send``.
An Ogg Vorbis encoder could be used instead of the lame MP3 encoder.
#. You might also need to change the ``shout2send`` default settings, run
``gst-inspect-1.0 shout2send`` to see the available settings. Most likely
you want to change ``ip``, ``username``, ``password``, and ``mount``.
Example for MP3 streaming:
.. code-block:: ini
[audio]
output = lamemp3enc ! shout2send mount=mopidy ip=127.0.0.1 port=8000 password=hackme
Example for Ogg Vorbis streaming:
.. code-block:: ini
[audio]
output = audioresample ! audioconvert ! vorbisenc ! oggmux ! shout2send mount=mopidy ip=127.0.0.1 port=8000 password=hackme
Other advanced setups are also possible for outputs. Basically, anything you
can use with the ``gst-launch-1.0`` command can be plugged into
:confval:`audio/output`.
.. _workaround:
**Workaround for end-of-track issues - fallback streams**
By using a *fallback stream* playing silence, you can somewhat mitigate the
signalling issues.
Example Icecast configuration:
.. code-block:: xml
<mount>
<mount-name>/mopidy</mount-name>
<fallback-mount>/silence.mp3</fallback-mount>
<fallback-override>1</fallback-override>
</mount>
The ``silence.mp3`` file needs to be placed in the directory defined by
``<webroot>...</webroot>``.
New configuration values
------------------------
Mopidy's config validator will stop you from defining any config values in
your config file that Mopidy doesn't know about. This may sound obnoxious,
but it helps us detect typos in your config, and deprecated config values that
should be removed or updated.
Mopidy's config validator will validate all of its own config sections and the
config sections belonging to any installed extension. It will raise an error if
you add any config values in your config file that Mopidy doesn't know about.
This may sound obnoxious, but it helps us detect typos in your config, and to
warn about deprecated config values that should be removed or updated.
If you're extending Mopidy, and want to use Mopidy's configuration
system, you can add new sections to the config without triggering the config

1
docs/index.rst
View File

@ -82,6 +82,7 @@ announcements related to Mopidy and Mopidy extensions.
config
running
service
audio
troubleshooting